05/13/2007 : 12 pics – front brake hose
front brake hose.
-
-
the truck on a jack stand showing the drum
-
-
the drum, front left
-
-
back of the drum, backing plate. The top is the bleeder screw. The hole below it is where the rubber brake hose screws in.
-
-
another shot of the rubber brake hose where it screws into the back of the drum, the bleeder screw is above.
-
-
loose fit for picture purposes, clips removed. the rubber brake hose goes through the mount, screws into the metal brake line, which goes to the left.
-
-
the other end of the rubber brake hose screws into the metal brake line at this mount. In the background to the right is where the other end of the metal brake line goes.
-
-
this is where the metal brake line that screws into the other end of the rubber brake hose, goes.
-
-
this is the female end that the metal brake line screws into.
-
-
adjustable side – the pieces together
-
-
this is the end of the rubber brake hose that screws into the back of the drum.
-
-
the entire rubber brake hose, end to end. the nut face on each brass end is 5/8
-
-
the entire rubber brake hose and the metal brake line, end to end. The nut on each end of the metal brake line is 7/16.
ch112098 <- this is on the metal, brass part of each end of the hose, I do not know where the number ‘starts’ at though.
I’m guessing it starts at h for hose, or c for Chevrolet.
on the rubber hose itself is: gy-1/8-5041 10/31/98dp – sae j1401
You must be logged in to post a comment.